Airfield Models - Order the New Standard Magnetic Fixture System II Set

April 02, 2024

News About My Magnetic Fixture System (Pricing and Availability)

$252.50 + Shipping. Florida residents add 6.5% sales tax.

This set is discounted an additional 7% at checkout.

Set without magnets: $195.00 + Shipping and sales tax if applicable.

This set includes twenty-four fixtures in five sizes plus two five inch fixture extensions. This or the Large Set are the first sets I would recommend to any builder who is even a little bit like me and doesn't want to be limited in what he builds.

If your interests are all over the place and one day you want to build a screaming 1/2A hot rod and the next winter you want to build a 4-engine bomber with 29-servos and then you want to build some whimsical steam-punk creation and then you're building control-line for a while and some free-flight then this is the kind of set you need because it won't hold you back.

Due to customer requests there is now an option to purchase this set without magnets or magnet-mounting hardware.

Please be aware that these fixtures are designed for one specific magnet and are not guaranteed to work with any other.

Set Contents:

New Standard Magnetic Fixture System II Set
Quantity	Item
6	1-1/2" Birch Plywood Fixture
4	2-1/2" Birch Plywood Fixture
4	3-1/2" Birch Plywood Fixture
4	5-1/2" Birch Plywood Fixture
6	7-1/2" Birch Plywood Fixture
2	5" Fixture Extension
108	Magnet Assembly w/Steel Poles
56	10-24 x 1" Steel Phillips Bolt w/Hex Nut
2	10-24 x 2-1/2" Steel Phillips Bolt
4	10-24 x 1-5/8" Steel Phillips Bolt
8	Hardwood Vertical Press
8	Hardwood Clamp Pad
8	10-24 x 1-5/8" Black Oxide Hex Head Steel Bolt
*16 + 8	6-32 x 5/8" Black Oxide Steel Socket Cap Bolt
*32 + 16	#6 Black Oxide Steel Flat Washer
*16 + 8	6-32 Black Oxide Steel Hex Nut
4	6-32 x 3/4" Black Oxide Steel Socket Cap Bolt
1	7/64" Hex Key
1	Instructions and Notes

* The first number is the quantity for the Vertical Presses and the second number is the quantity for the 5" Fixture Extensions. Vertical Press hardware and Fixture Extension hardware is bagged separately.

Set contains 42 hand-made wood parts. Please note that hardwood pieces may be a different species than shown here. I use only quality hardwoods such as maple, cherry (shown), walnut, etc. Vertical Presses and Clamp Pads in your set will always be made from the same species of wood.



(6) 1-1/2" Fixture.	(4) 2-1/2" Fixture.	(4) 3-1/2" Fixture.	(4) 5-1/2" Fixture.	(6) 7-1/2" Fixture.	(2) 5" Fixture Extension.

(8) Vertical Press Assembly w/Clamp Pad and hardware.	(108) Latch Magnet Assembly.	Fixture Extension Mounting Hardware. What you see here x 2	(4) 6-32 x 3/4" Socket Cap Bolts. Used to mount Vertical Presses where Fixture Extensions overlap Fixtures.	Magnet mounting hardware.	(4) 10-24 x 1-5/8" bolts for Brute Press conversions.

(2) 10-24 x 2-1/2" bolts for Monster Press conversions.	7/64 Hex Key.	Current special includes one free sanding block faced with high quality Norton 220 grit sandpaper on one side and 180 grit sandpaper on the other side.

Other Fixture Sets


Small Fixture Set Go there	Small/Medium Fixture Set Go there	Medium Fixture Set Go there	Large Fixture Set Go there