F Airfield Models - Visitor Feedback

Airfield Models - Visitor Feedback

Back to Airfield Models | View guestbook | Sign guestbook

Airfield Models (http://www.airfieldmodels.com/)

There are 276 entries displayed on 28 pages.
1 2 3 4 5 6  |  Next >  |  Last >>

Submitted by Comments:
Name: Samuel E. Oughton
From: Hideaway, Texas 75771
This web site is the absolutely best place to get solid info for aspiring model builders or even ARF bashers.

Now there is a place I can send new modelers to for the how to.

Those of us in the hobby, are finding less and less folks delving into building AND flying R/C airplanes. We'd hoped the electrics would inspire interest in Model Aviation, but even that branch has become exorbitantly expensive. Batteries are expensive and dangerous.

Thanks again. No reply necessary.
Sam Oughton Rook37 Vietnam Vet.
Added: December 27, 2008 Delete this entry  Reply to entry  View IP address  View E-mail address  
Submitted by Comments:
Name: Jese Shepherd
From: see last entry
Alright already !!--- remove the decimal point from the .424 dim, OR, remove the percent sign! Sorry to find out that at 87 I can still make mistakes. JFS
Added: December 23, 2008 Delete this entry  Reply to entry  View IP address  View E-mail address  
Submitted by Comments:
Name: Jesse F. Shepherd, Sr.
From: Portland , Or. by way of TEX
I HAVE JUST NOW LOOKED UP YOUR SITE LOOKING FOR VERIFCATION OF THE MAC LOCATION PROCEDURE AND FIND THAT THERE IS AN ERROR IN THE ELLIPSE INFO. IN MY YEARS OF AERO RESEARCH CAREER, I HAVE BEEN TAUGHT THAT THE MAC PASSES THROUGH THE CENTROID OF THE WING PLANFORM,(THE CENTER OF ITS AREA)-- THE SPANWISE DIMENTION SHOWN IS MORE THAT HALFWAY OUT. THAT'S AN IMPOSIBILITY AS SIMPLE OBSERVATION SHOWS THAT THE INBOARD PORTION HAS MORE AREA THAN THE OUTBOARD. NOT EQUAL IN AREA AS THE CENTROID POSITION SHOULD SPLIT THE AREA ! MY CALCULATIONS SHOW A DISTANCE OUT FROM THE ROOT CHORD TO BE .424%. THIS IS BASED ON THE CENTROID OF A CIRCLE SEGMENT, SINCE AN ELLIPSE IS IN FACT BASED ON CIRCLE THEORY. -- PLEASE COMMENT. JFS
Added: December 23, 2008 Delete this entry  Reply to entry  View IP address  View E-mail address  
Submitted by Comments:
Name: Tom Matthews
From: Yukon, OK
I have been built several RC kits over the past 20 plus years and enjoyed searching these articles on building techniques and tools. I have built three 60 size war birds. What I would like is plans to construct a scale cockpit for a war bird. Some how the cockpit just does not look scale with a bust of the pilot glued on a platform. Anyone having info on constructing a cockpit, please let me know.
Added: December 12, 2008 Delete this entry  Reply to entry  View IP address  View E-mail address  
Submitted by Comments:
Name: Norm E
Thanks for your discussion on adhedives! It's the best I have on found on many searches. You present extremely useful information in a clear understandable manner. PS I have a PhD in materials science (metals, not adhesives) (sorry for previous typos)
Added: December 6, 2008 Delete this entry  Reply to entry  View IP address  View E-mail address  
Submitted by Comments:
Name: lance Pizzica
From: eugene, Oregon usa
Thank you for the info on hinges. I am building a 1/2a scale Guillows Mess. bf 109. This thing is my first build, and I was enjoying it, up till I tried to use the crappy fabric hinges (twice).Well anyway, thanks.
Added: December 1, 2008 Delete this entry  Reply to entry  View IP address  View E-mail address  
Submitted by Comments:
Name: Adam Reay
From: Lymington, UK
I have just retired and have taken up modelling again after a gap of 50 years. Your site has brought me up to date with a wealth of golden nuggets of information. Thanks for all your help.
The big message seems to be "Don't cut corners!"
Added: December 1, 2008 Delete this entry  Reply to entry  View IP address  View E-mail address  
Submitted by Comments:
Name: Jimmy
From: Little Rock, Arkansas
Good info for beginers to modeling.
Added: October 20, 2008 Delete this entry  Reply to entry  View IP address  View E-mail address  
Submitted by Comments:
Name: P Khatib
From: Ontario, Canada
Indeed one of the best RC site, with a lot of information with meticulous details. Love the glass-top work bench.

Cheers!!
Added: September 29, 2008 Delete this entry  Reply to entry  View IP address  View E-mail address  
Submitted by Comments:
Name: James Mullin
From: Akron, Ohio
Marvelous site! This is one big goldmine of information for this balsa butcher. It should help me do better.
Added: September 12, 2008 Delete this entry  Reply to entry  View IP address  View E-mail address  

1 2 3 4 5 6  |  Next >  |  Last >>

Powered by PHP guestbook 1.5 from PHPJunkyard - Free PHP scripts